Trunk/Distribution Connectors

	Gilbert GRS Series Connectors GRS series 3-piece trunk and distribution connectors. Trunk and Distribution connectors are used in low power RF, video, data signals and system power broadband systems. Chassis mounting connectors are used in 5/8-24 equipment entry through independent seizing of the center conductor, the installer can verify the center conductor has been seized prior to tightening the back nut. Placement of the integral mandrel of the connector in the main nut provides a full view of the center conductor’s entrance into the seizing mechanism and requires minimal pull back for ease of installation. The GRS connectors have a center conductor cutting guide and are reusable.

	Gilbert G2 Series Connectors G2 series 2-piece trunk and distribution connectors. Developed in response for a need of an intelligent two-piece connector that will provide superior performance, while eliminating the common disadvantages of traditional 2-piece designs. It is the only two-piece connector on the market that gives installers a full view of the cable's center conductor insertion in to the connector seizing mechanism. It provides a patented support sleeve located in the back nut of the connector, minimizing cable "pull back". The Tri-Start thread system (patent pending) minimizes the required back nut rotations when tightening the connector. The G2 connectors have a center conductor cutting guide and are reusable.

	Gilbert Trunk and Feeder Adapters Adapters are essential components to configure equipment for aerial and underground applications and are used to change the direction of the cable where space is limited or where tight bends are required. Our adapters allow room to economize the enclosures installed on municipal and customer properties. They eliminate the need for excess splicing in system rebuilds and reduce the number of cables damaged through tight bending radiuses and other installation challenges. Seizure screws or socket contacts are used to make contact with the mating connector pin.

	Gilbert Special Application Products Special Application products are offer a unique interconnect solution and generally do not fit into the other major connector product categories. Our design engineers are continuously developing new specialty products to meet the changing needs of the telecommunications industry. • Tap Bypass Jumper • “F” Female Test Adapter • TX10-15 Connectors • Power Connectors • Power Adapters

	Signalvision Adaptors and Terminators These connectors feature high quality construction and superior specifications.